Phone: (450)-562-0344 All prices are listed in Canadian Dollars Lachute Rotated Mount Turbo kit The Lachute GT30 turbo kit is designed to maximize performance for street, drag, or the ultimate road racing needs. This turbo kit is a bolt on high horsepower setup for your 2.0L or 2.5L car. The kit includes all T304 stainless steel piping that is TIG welded and thick flanges. Piping includes a new 3" downpipe that will fit to your aftermarket or factory exhaust, a new uppipe to work with the factory style headers and the extra piping to accomodate the TIAL 44mm wastegate. The Garrett GT3076R is both oil and water cooled. Lachute Performance supplies the necessary steel braided Teflon lines and Rubber hoses need to fit the factory connections. We also include a Tial 44mm wastegate to control pressure for maximum boost needs. The Lachute Performance GT3076R turbo kit is designed to make over 450 wheel horsepower on race gas and over 400 wheel horsepower on pump gas as tested on the STI. Part # Description Price Lachute GT30 Lachute Rotated Mount Turbo kit 3800.00 CUSCO front and rear Braces USED CUSCO front and rear Braces USED for WRX 2002-2005 price for the pair. Part # Description Price Cuscus CUSCO front and rear Braces USED 300.00 Tial 44mm Wastegate - High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs. - High temperature silicone Nomex reinforced actuator diaphragm. - 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C). - Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing. - All Stainless Steel hardware. - Mating weld flanges are 304L - Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black). Part # Description Price Tial44 Tial 44mm Wastegate 515.00 Tial 38mm Wastegate - Anodized - 347 Stainless Steel Alloy is used for valve and valve housing. - High temperature silicone Nomex reinforced actuator diaphragm. - 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resists "relaxing" at temperature to 900F (483C). - CNC Machined 304L 12mm thick weld flanges. - Color anodized 6061-T651 aluminum actuator (Silver, Red, Blue, Purple, Black). - Wastegates shipped with air fittings and stainless hardware. - Flanges are an extra cost, they do not come with the wastegate unit. Included with every Tial F38: F38 Assembly F38 Valve Seat 2 Gaskets 2 TiAL Air Fittings 2 Mounting Bolts 4 Flex Washers Part # Description Price TIAL38 Tial 38mm Wastegate - Anodized 335.00 Injen STi Cold Air Intake 04-06 2.5L As part of Injens SP Series Division Intakes each intake is built from 6061, T-6 aluminum alloy to ensure the lightest design possible. Every SP Series intake is certified or pending by the California Air Resource Board and is backed by Injen Technology’s limited lifetime warranty. Part # Description Price InjenCAISTI Injen STi Cold Air Intake 04-06 2.5L 378.00 Prodrive WRX Aero Pack Rear UK300 Spoiler Prodrive's UK300 Rear Decklid Spoiler for the Subaru WRX. Includeds 3rd brake light and all hardware required for install. Part # Description Price ProdriveAeroRear Prodrive WRX Aero Pack Rear UK300 Spoiler 555.55 APR Carbon Fiber GTC 300 WRX STI Spec Spoiler With a span of 67 inches and a height of 13 inches, the GTC-300 is an adjustable wing that means serious business. The GTC-300 3D airfoil shape allows for optimal airflow that reduces drag yet supplies an effective amount of downforce. Part # Description Price APRGTC 300 APR Carbon Fiber GTC 300 1495.00 APR Carbon Fiber GTC 200 WRX STI Spec Spoiler The GTC-200 wing is the latest aerodynamic 3D designed technology aerofoil, constructed with carbon fiber composite materials from the aerospace industry, and the center humped aerofoil design for cleaner air travel over the wing. Combining these two newest technologies and its adjustablilty, this is the most efficient lightweight GT wing of all. Part # Description Price APR GTC 200 APR Carbon Fiber GTC 200 WRX STI Spec Spoiler 855.55 HKS 05-06 Legacy GT SSQV Blow Off Valve Kit HKS Super Sequential Blowoff Valves (SSQV) are dual stage pull type relief valves that by design do not leak under high boost conditions or under idle vacuum and is actuated by pressure alterations to ensure a quick primary and secondary valve response. Part # Description Price SSQVLEG HKS 05-06 Legacy GT SSQV Blow Off Valve Kit 415.00 Prodrive WR Suspension Kit This complete kit features Eibach springs and inverted Bilstein struts, manufactured to Prodrive’s specifications. The suspension kit is compatible with the Impreza GC8 Part # Description Price Prodrive WR Suspension Kit Prodrive WR Suspension Kit 1897.00 Prodrive P1 Impreza Springs Prodrive’s high-performance spring sets are designed to work with either standard Impreza dampers or with JDM STi RA Dampers. These springs lower the vehicle approximately 25mm and increase the spring rate by approximately 25%. Springs are manufactured by Eibach to Prodrive's specification Part # Description Price ProGCsprings Prodrive P1 Impreza Springs 365.00 Prodrive 2005+ STi Lowering Springs These high-performance spring sets are specifically designed to work with the factory struts. These springs lower the vehicle approximately 20mm. This spring kit is available for 05+ WRX STi. This kit includes new Bump stops. Part # Description Price Pro2005SpringsSTI Prodrive 2005+ STi Lowering Springs 365.00 Prodrive 2004 STi Lowering Springs These high-performance spring sets are specifically designed to work with the factory struts. These springs lower the vehicle approximately 20mm. Part # Description Price Pro2004SpringsSTI Prodrive 2004 STi Lowering Springs 365.00 Prodrive WRX Lowering Springs 2002 - 2003 These high-performance spring sets are specifically designed to work with the factory struts. These springs lower the vehicle approximately 20mm and increase the spring rate by 25%. This complete kit features Eibach springs manufactured to Prodrive’s specifications. This spring kit is available for 2002-2003 WRX and Impreza. Part # Description Price Prodrive2002 - 2003wrx Prodrive WRX Lowering Springs 2002 - 2003 365.00 Prodrive Subaru WRX Lowering Springs These high-performance spring sets are specifically designed to work with the factory struts. These springs lower the vehicle approximately 20mm and increase the spring rate by 25%. This complete kit features Eibach springs manufactured to Prodrive's specifications. This spring kit is available for 2004+ WRX and Impreza. Part # Description Price Prodrivewrxspring set Prodrive Subaru WRX Lowering Springs 365.00 Subaru OEM EJ25 Short Block Genuine Subaru OEM EJ25 Short Block motor. This is the same block that comes with the USDM 04+ STi, which can easily hold 400+ crank HP. Part # Description Price Subaru OEM EJ25 Short Block Subaru OEM EJ25 Short Block 2495.00 COBB Tuning heat shield The COBB Tuning stainless steel heat shield is in house designed and a replacement for the factory turbo heat shield found on most vehicles. A modification which goes hand in hand with an aftermarket downpipe install, the heat shield prevent the venting of heat cause from exhaust gas temperatures to vent into the engine bay, there by reducing heat soak into key components that benefit from cooler ambient temperature, such as the intercooler. Part # Description Price 513500 COBB Tuning heat shield 75.00 STI 06-07 V-Limited Lip Spoiler Add Style and performance to your new STI with the new V- Limited lip spoiler. Cuts drag, adds down force and smooths out the under carriage. This will make you more stable at higher speeds. FIA homologated for Group N rally cars. Part # Description Price VLip STI 06-07 V-Limited Lip Spoiler 555.00 Carbon Fiber hood USED Carbon Fiber hood WITH SMALL DEFECTS Part # Description Price CFH Carbon Fiber hood 300.00 22B Replica Wing USED 22B Replica Wing USED Part # Description Price 22BWU 22B Replica Wing USED 400.00 Recaro Seat USED Pricing is for the pair. These are fully adjustable Recaro seats with air pump and railing. Part # Description Price Recaro Recaro Seats used 800.00 Test Product test description Part # Description Price 123456 Test 10.00 2.5L NA Impreza Catback exhaust Lachute Performance is proud to offer its brand new 2008 2.5L NA catback exhaust system. This exhaust system is entirely made of 304 Staineless Steel. Flanges, brackets, and pipes of .125 guage wall tubing. All flanges have been laser cut and tig welded on BOTH sides to provide optimum performance, durability and flow. The entire system can be install seperatly in pieces or as a complete kit. Part # Description Price WRX 2008 Sedan Exhaust Lachute Performance is proud to offer its brand new 2008 WRX Sedan Turboback and catback exhaust system. This exhaust system from the turbo to the muffler tips is entirely made of 304 Staineless Steel. Flanges, brackets, and pipes of .125 guage wall tubing. All flanges have been laser cut and tig welded on BOTH sides to provide optimum performance, durability and flow. The entire system can be install seperatly in pieces or as a complete kit. Part # Description Price WRX 2008 Hatchback Catback Exhaust Lachute Performance is proud to offer its brand new 2008 WRX hatchback Turboback and catback exhaust system. This exhaust system from the turbo to the muffler tips is entirely made of 304 Staineless Steel. Flanges, brackets, and pipes of .125 guage wall tubing. All flanges have been laser cut and tig welded on BOTH sides to provide optimum performance, durability and flow. The entire system can be install seperatly in pieces or as a complete kit. SOUND CLIP Part # Description Price Cat208 Cat2008 0.00 Warning: installation of some performance parts may affect your factory warranty. please ask for details before ordering.